An Overview of Rigid-flex Design
September 13, 2023 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
For this month’s issue on rigid-flex design, we spoke with instructor Kris Moyer, who teaches the IPC class “PCB Design for Flex and Rigid-Flex Boards.” In this wide-ranging interview, Kris breaks down the hurdles facing rigid-flex designers and offers a variety of solutions for rigid board designers taking on their first rigid-flex circuits. He also provides a few horror stories to illustrate what happens if you don’t follow sound design practices, rules, and standards. And, as Kris points out, “Your fabricator is your friend.”
Andy Shaughnessy: What are you trying to get across to the students when you’re teaching rigid-flex design? What are the biggest challenges?
Kris Moyer: One of the biggest concepts I want to get across to students is that there are a lot of untapped, unforeseen, intangible benefits to rigid-flex, both from a design point of view and a total cost of ownership point of view. Rigid boards are usually connected with wire harnesses or cables, and we know that wire harnesses and cables are the largest point of failure in the system. Wires and cables tend to break, especially at the solder joints or pins. If we can remove all those harnesses and integrate all of that into the structure of the board, we can vastly reduce the failure rate of our designs.
If you choose to go rigid-flex, there is an initial cost expenditure: added processes, time, complexity, and all of that. But let's say I have a design with three circuit boards that would need two cable harnesses, one from board one to board two, and one from board two to board three. That's a grand total of five different item numbers I would need for each board. I would have three drawing numbers: a number for the schematic, a number for the board, and a number for the assembly. For three boards, that's nine drawings I must maintain, and then another two drawings per cable, and let's assume two cables. That's a total of 13 separate drawings and part numbers I have to maintain in my system.
To read this entire conversation, which appeared in the September 2023 issue of Design007 Magazine, click here.
Suggested Items
AIM Solder Appoints Mhanny Aguillo as Southeast Asia Technical Sales Manager
05/31/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials, is pleased to announce the appointment of Mhanny Aguillo as the Southeast Asia Technical Sales Manager.
Merlin Flex Invests in New Techwin Solder Mask Developer
05/31/2024 | Merlin Flex LtdMerlin Flex Continue their investment programme with the installation & commissioning of a new Techwin Solder Mask Developer. This new machine allows faster & more accurate developing in the solder mask process.
IPC Hand Soldering Competition Thailand 2024
05/29/2024 | IPCIPC’s hand soldering competitions around the world are highly popular events generating a lot of attention, participation and publicity. The competition attracts the enthusiastic participation of thousands of professionals specializing in high-reliability products within the electronics industry such as defense, aerospace/aviation, rail transportation, automotive electronics, consumer electronics, etc.
AIM Solder Joins International Electronics Manufacturing Initiative (iNEMI)
05/29/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials, is proud to announce its membership with the International Electronics Manufacturing Initiative (iNEMI).
Real Time with… IPC APEX EXPO 2024: Advanced Technologies with BlueRing Stencils
05/28/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Greg Smith, manager of stencil technology with BlueRing Stencils, discuss the company's capabilities and services. They explore the use of nano coatings for thin stencils and determining the area ratio. Greg emphasizes the role of stencil artwork in controlling solder deposition and the need for collaboration between designers and stencil companies. They also focus on thinner stencils and step stenciling techniques for achieving proper solder deposition.